OTHER SIMILAR PRODUCTS
Pressure Independent Control Valve 50-300
Automatic balancing eliminates overflows, regardless of fluctuating pressure conditions in the system Motoric actuator 0-10 V and 3 point control Differential pressure operating range up to 800 kPa High flows with minimal required differential pressur
PRYS Series SS Pressure Reducing Valve
• Direct reaction design, high accuracy of pressure adjustment. • Diaphragm type, quick response against pressure change. • Big inner chamber, avoid noise. • Inlet pressure balancing function, fluctuating inlet pressure doesn’t influence outlet pressur
A200 ACV Series Pressure Reducing Valve
• Automatic control valve, running by itself. • One complete combined disc, easy for maintenance. • Diaphragm type; quick response against pressure change. • Big inner chamber, avoid noise by cavitations and reduce static pressure. • Inlet pressure ba
A300 Series Slow-closure Type Check Valve
• Automatic control valve , running by itself. • One complete combined disc, easy for maintenance. • Diaphragm type; zero friction, quick response against pressure change. • The close time can be adjustable; can reduce the damage of water hammer and lo
S10 Series Rubber Flexible Joint PN16 Flanged Single Ball Type
• High impact resistance rubber with nylon wire and stainless steel wire, is able to bear high pressure flows without anyinfluence on the product tensile strength. • High reliability: 100000 times bending fatigue test, to make sure the long life cycle.
S30 Series Rubber Expansion Joint PN10 Thread Double Ball Type
• High impact resistance rubber with nylon wire and stainless steel wire, is able to bear high pressure flows without anyinfluence on the product tensile strength. • High reliability: 100000 times bending fatigue test, to make sure the long life cycle.
CARBON DIOXIDE and TEMPERATURE TRANSMITTER
The Series CDT Carbon Dioxide and Temperature Transmitters accurately monitor the CO2 concentration and temperature in indoor environments to help achieve energy savings. In order to achieve a higher level of accuracy, the Series CDT includes barometric pressure adjustment.
CARBON DIOXIDE and TEMPERATURE TRANSMITTER
The Series CDT Carbon Dioxide and Temperature Transmitters accurately monitor the CO2 concentration and temperature in indoor environments to help achieve energy savings. In order to achieve a higher level of accuracy, the Series CDT includes barometric pressure adjustment.
HUMIDITY and TEMPERATURE TRANSMITTER
The Series RHP Humidity and Temperature Transmitter combine the voltage or current humidity transmitter output with a passive temperature thermistor or RTD output. Featuring polymer capacitance humidity sensors, models are available in 2%, 3% or 5% accuracies.
DUCT SMOKE DETECTOR
The Series SL-2000 Duct Smoke Detector is crucial for early detection of smoke and products of combustion present within HVAC ductwork. This series can be utilized in many different types of applications including commercial, industrial, and residential. The unit is designed to not only alarm when smoke is detected, but will also utilize relays to disable fans and blowers.
HUMIDITY and TEMPERATURE TRANSMITTER
The Series RHP Humidity and Temperature Transmitter combine the voltage or current humidity transmitter output with a passive temperature thermistor or RTD output. Featuring polymer capacitance humidity sensors, models are available in 2%, 3% or 5% accuracies.
WIRELESS COMMUNICATIONS ADJUSTABLE DIFFERENTIAL PRESSURE SWITCH
The Series EWDP Wireless Communication Adjustable Differential Pressure Switch uses EnOcean® wireless technology to monitor pressure, vacuum, and differential pressures. The dual scaled adjustment knob in inches of water column and pascals allows changes to the pressure set point to be made without a pressure gage.
DUCT SMOKE DETECTOR
Duct Smoke Detector is crucial for early detection of smoke and products of combustion present within HVAC ductwork. This series can be utilized in many different types of applications including commercial, industrial, and residential. The unit is designed to not only alarm when smoke is detected, but will also utilize relays to disable fans and blowers.
WATER DETECTOR AND SENSOR TAPE
The Water Detectors and Sensor Tape is designed for dependable detection of water presence even of low conductive liquids. The water sensing tape attaches to module and if any liquid comes in contact with the tape the resistance is changed and the alarm will be triggered.
HUMIDITY and TEMPERATURE TRANSMITTER
The Series RHP Humidity and Temperature Transmitter combine the voltage or current humidity transmitter output with a passive temperature thermistor or RTD output. Featuring polymer capacitance humidity sensors, models are available in 2%, 3% or 5% accuracies. Duct mounted transmitters are available with an optional two-line alpha numeric LCD display.
HUMIDITY and TEMPERATURE TRANSMITTER
The Series RHP Humidity and Temperature Transmitter combine the voltage or current humidity transmitter output with a passive temperature thermistor or RTD output. Featuring polymer capacitance humidity sensors, models are available in 2%, 3% or 5% accuracies. Duct mounted transmitters are available with an optional two-line alpha numeric LCD display.
WATER DETECTOR AND SENSOR TAPE
The Water Detectors and Sensor Tapes is designed for dependable detection of water presence even of low conductive liquids. The water sensing tape attaches to module and if any liquid comes in contact with the tape the resistance is changed and the alarm will be triggered.
WALL MOUNT HUMIDITY or TEMPERATURE or DEW POINT TRANSMITTER
The Series RHP-E/N Wall Mount Humidity/Temperature/Dew Point Transmitter is the most versatile room transmitter on the market. The stylish housing is well vented to provide air flow across the sensor to improve measurement accuracy. The humidity and the dew point are measured using a capacitive polymer sensor that completely recovers from 100% saturation. The humidity and dew point can have either a current or voltage output, while the optional temperature output can be a current, voltage, RTD or thermistor.
DUCT AND IMMERSION BUILDING AUTOMATION TEMPERATURE SENSOR
The Series TE Duct and Immersion Temperature Sensor can be used to monitor air or water temperature throughout a building management system or an air handler unit. Flanged duct sensors monitor the supply or return air and provide a thermistor or RTD output to the digital controller. Immersion sensors which are supplied with compression fittings are typically used to monitor the hot or chilled water lines throughout a building.
DIFFERENTIAL PRESSURE TRANSMITTER
The Differential Pressure Transmitters with One-Touch Digital Push- Button Calibration Technology are designed for simplicity, making them the ideal choice for installers and maintenance professionals. These instruments not only alleviate cumbersome turn pots typically found in most transmitters, but eliminate entirely the need to span the instruments during calibration.
DIFFERENTIAL PRESSURE TRANSMITTER
The Differential Pressure Transmitters with One-Touch Digital Push- Button Calibration Technology are designed for simplicity, making them the ideal choice for installers and maintenance professionals. These instruments not only alleviate cumbersome turn pots typically found in most transmitters, but eliminate entirely the need to span the instruments during calibration.
Warning: mysqli_close() expects parameter 1 to be mysqli, null given in /home/enye/public_html/enyecontrols.com/product.php on line 459